Vehicle 7.5T Weight Restriction in Place Permanent UK Road Sign
- Post Mountable with 2 fixing rails
- Class 2 R2/RA2 Reflective
- Available in 300mm, 600mm, 750mm, 900mm Disc
Diagram 622.1A prohibits vehicles capable of taking loads of 7.5T or more. Used to stop vehicles entering stretches of road for environmental reasons such as causing a nuisance to residents or due to the narrow roads. The sign is not intended to be used a structural warning due to weak bridges etc

Specification:
Material: R2/RA2 reflective overlay on aluminium composite backing
Fixing Method: 2 fixing rails for post mounting
Reflectivity: Class 2 R2/RA2
As per the UK Highways Traffic Sign Manual Chapter 3 - Regulatory Signs page: 49 The following advice is given:
5.5.1. The sign to diagram 622.1A (S3‑2‑13, see Figure 5-13) is used to give effect to an order prohibiting goods vehicles with a plated maximum gross weight exceeding that shown on the sign (indicated in tonnes). The restriction applies to such vehicles even if they are unladen or they are just the cab sections of articulated vehicles (tractor units) and in these conditions their weight is below that shown on the sign. This sign should be used when goods vehicles are prohibited for environmental reasons, e.g. where roads are narrow and unsuitable for large vehicles, or to protect residents from the nuisance caused by lorries in residential streets. The sign is not used for structural limits, such as those to protect weak bridges.