50mm post base plates used to improve stability of 50mm post installations that are set in concrete etc. Available for both square & round posts. The post sits in the...
76mm post base plates used to improve stability of 76mm post installations that are set in concrete etc. Available for both square & round posts. The post sits in the...
Sign Band is the industry standard for installing signs with rails to posts. Used in conjunction with the sign banding tool and buckles, the steel band securely fixes signs to...
The Sign Banding Tool is used for attaching signs with channel to posts. Our forged alloy steel tools are zinc plated to protect against corrosion and can be used with...
Universal Bolt Through Sign Bracket A versatile solution for mounting signs to posts. The Bolt Through sign bracket provides 2x M8 hex screws to bolt through the face of your...
These stainless steel brackets are a versatile solution for mounting signage to posts and uprights. 2 bolts are fixed through the sign face on either side to hold the bracket...
The RSJ Sign Clamp is designed for use with all RSJ & Universal beam uprights. The RSJ clamps can also be used on lightweight gantries being installed on active traffic management...
Aluminium Offset Clamps also know as "Uniclamps" are a 2-part cast aluminium fixing used to fix signs to specific diameter posts. Offset clamps are mainly used to install finger post signs for UK...
Aluminium offset brackets , powder coated grey. To be pop rivetted to T rail that holds the sign board. Small/large size corresponds to the small/large T rail. Any sign over...
Stainless Steel M8 square head bolts designed to fit exactly into the sign channels to provide maximum stability. Available as singles or packs of 100 * Maximum torque for M8...
The FastFix Sign Mount is a great fixing for temporary signage or event signs. The high density plastic fixing mount is a 76mm / 3" dia disc with raised lugs...
Quick and effective clips for fixing the sign directly to a mesh fence. Simply drill through your sign (M8 thread) and tighten the 25mm hex bolt up into the plastic...
Highly effective, torque sensitive screwdriver, calibrated to bend when the proper torque is attained. Handy tool with flexible shaft to tighten the universal screw banding properly, also on hard-to-reach places...
A screwdriver and T-bar combination tool with non-removable Tamtorque bit. Tamper-Proof installation clamps for the secure and reliable fastening of all types of signage, street furniture and other mountable equipment...
1/4" x 170mm Long reach bit for fixing tamtorque security banding in place. Great for hard to reach places between sign boards.
The wayfinding finger post system provides an effective system for directional wayfinding. Used throughout the sign industry from simple footpath signs, traffic signage and retail the humble finger post is...
50mm Diameter White Sign Post Clip - Anti-Rotational D Clip This sign post clip has been designed to attach signs with channel to upright posts that have a 50mm diameter, The white powder coat...
The interlocking channel butting plate is used for joining interlocking channel lengths to ensure they are locked together and to prevent gaps between the sign panels. Each butting plate is...
Fixings - M8 Shear Nuts - single. Troubled by sign theft? Then shear nuts are the answer, simply tighten up the nut in place of the normal nut (conical end...
200mm x 200mm Square Sign Post Clip This sign post clip has been designed to attach signs with channel to upright posts that are 200mm x 200mm in size. Key features...
323mm Diameter Sign Post Clip - Anti-Rotational D Clip Fast, simple sign installations are achieved using these standard sign post clips. This sign post clip has been designed to attach...
200mm x 100mm Sign Post Clip This sign post clip has been designed to attach signs with channel to upright posts that are 200mm x 100mm in size. Key features...
120 x 120mm Square Sign Post Clip This sign post clip has been designed to attach signs with channel to upright posts that are 120 x 120mm in size. Key...
A simple but effective fixing designed to fix a sign between two posts without the need of a specialist system. Each clip is supplied with an M8 x 25mm nut,...
Uk Sign Fixings, Anti-rotational Sign Post Clips, Post Caps, and Universal Channel Clamps
UK Traffic Signs Fixings & Traffic Clips
Sign Trade Supplies stocks one of the largest ranges of sign fixing clips, brackets and clamps in the UK. We supply our sign fixing solutions nationwide on a next day service allowing you to install your signs as fast as your clients require. Our white label delivery option allows you to order your fixings directly to site without your client receiving any Sign Trade Supplies documentation.
Anti-rotational sign clips / Sign U clamps / Sign Post Brackets
Our anti-rotational sign fixings allow for a strong and secure fixing to upright sign posts. The simple sign clips allow any sign with small OR medium rail fixed to the rear to be attached to sign posts. We have split our range of sign clips into different categories depending on size. Our most common sizes (50mm, 76mm and 89mm) also are available in a range of powder coat colours, these clips can be purchased in Black, white and grey powder coat aswell as the standard stainless steel finish.
Mini Railing Clips - 13mm - 40mm Railing diameters
Sizes in this range: 13mm, 16mm, 19mm, 25mm, 32mm and 40mm
Standard Sign Clips - 47mm - 114mm Post Diameters
Sizes in this range: 47mm, 50mm, 60mm, 76mm, 89mm, 102mm and 114mm
Large 2 Bolt Sign Clips - 127 - 273mm Post Diameters
Sizes in this range: 127mm, 140mm, 150mm, 168mm, 194mm, 219mm, 244mm and 273mm
Square & rectangle clips and Back-to-back sign clips
Our square and rectangle clips include: 30mm square, 40mm square, 50mm square, 80mmm square, 76mm square. The back to back clips allow signs to be mounted double-sided onto a post, this is perfect when signs need to be seen from both sides. Our back to back clips are available in sizes: 50mm , 76mm, 89mm and 102mm.
Universal Channel Clamps UCC and Banding, jubilee clips and Screw Band (Worm Drive)
When there is not a specified sign post diameter or there is not an anti-rotational sign clip available then you have the choice of using a UCC (universal channel clamp) and a range of stainless steel sign band. The universal channel clamp is inserted into the small or medium sign channel that is fixed to the sign blank. The either an adjustable universal screw band is tightened through the UCC and around the post. Or a reel of 12.5mm or 19mm stainless steel sign band can be used with the Sign Band Tool & a buckle.
What size clip do i need?
Days
Hours
Minutes
Seconds