Crystal Clear Structural MMA Adhesive for Precision Sign Manufacturing
Exceptional Clarity Meets Structural Strength
STYKRA® 360 is a high-performance, two-component structural MMA adhesive engineered for demanding signage and display manufacturing applications. Featuring a crystal clear bond line and fast cure time, it is the adhesive of choice where aesthetics and strength are equally important.
Developed specifically for transparent and visually sensitive bonding tasks, STYKRA 360 offers optical clarity without compromising mechanical integrity. It is ideal for use on transparent substrates or when the adhesive line must remain invisible in the final assembly.
Key Features and Advantages
-
Crystal Clear Bonding
Delivers an optically clear finish suitable for transparent plastics, metals, wood, and composite materials. Perfect for high-end signage and display assemblies.
-
Zero Gap Capability
Maintains excellent performance even on irregular or uneven surfaces. Eliminates the need for gap fillers or visual masking.
-
Fast Handling Strength
Offers an optimized open time of 1 to 2 minutes, with handling strength achieved within 4 to 5 minutes. Enables fast-paced, high-efficiency production workflows.
-
High Durability and Environmental Resistance
Exhibits excellent resistance to UV radiation, salt spray, water exposure, and harsh chemicals. Provides long-term stability and durability in both indoor and outdoor environments.
-
Odor-Reduced Formula
Improved user comfort with minimized odor during application, making it suitable for extended use in confined or enclosed spaces.
-
Smooth and Effortless Application
Engineered for smooth, consistent flow with minimal trigger pressure. Reduces hand fatigue during extended use or large production runs.
-
No Primer Required
Bonds strongly to a wide range of substrates without the need for surface pre-treatment, saving time and reducing preparation steps.
Broad Compatibility Across Materials
STYKRA 360 is highly versatile and performs reliably on a wide range of surfaces. It bonds particularly well with:
- Nylon Locators (SimpleFix & SnapFix)
- PMMA (Plexiglas®, Perspex®) and other transparent plastics
- Aluminium and other metals
- Wood and engineered wood products
- Composite materials including ACM (Aluminium Composite Material)
Exceptional Mechanical Performance
Once fully cured, STYKRA 360 provides superior mechanical strength. It resists impact, peeling, and dynamic stress, making it suitable for load-bearing or vibration-sensitive applications. It retains integrity under extreme temperatures ranging from -55°C to +125°C, ensuring reliable performance across diverse environments.
Applications and Use Cases
STYKRA 360 is purpose-built for professional use in sign and display manufacturing, especially where visual clarity is essential.
Instructions for Use
Always consult the safety data sheet before first use.
The optimum processing temperature is between +8°C and +15°C. Low temperatures can have an adverse effect on curing strength.
Before each application, make sure that the mixer to be used is correctly attached to the cartridge and that the cartridge is correctly placed in the dispensing gun.
If necessary, carry out surface preparation. The surfaces to be bonded must not be contaminated with oils, dust, paints, oxidation layers or any other impurities.
Before applying to the surfaces to be bonded, a small amount of adhesive must be squeezed out to ensure complete mixing of both components, otherwise the adhesive properties will be reduced.
Apply sufficient adhesive to ensure an even mixture. The subsequent joining of the materials must take place within the processing time. Clamp the parts to be joined if necessary. After the end of the processing time, the adhesive should not be subjected to heavy mechanical stress until it has fully cured, as otherwise the adhesion properties will be affected. If you have any further questions about the product or its application, please contact our application technology department.
Skip to content
