Soudal Fix ALL® High Tack INVISIBLE - Multi purpose adhesive

Soudal Fix ALL® High Tack INVISIBLE - Multi purpose adhesive

Availability: In Stock



Soudal Fix All High Tack Invisible is a super strong adhesive with very high initial tack. Can be applied to signage and boards in all weather conditions. Suitable for both internal and external signage and display applications. The Soudal High Tack Invisible is virtually odourless with adhesion to to most construction surfaces without the need for priming.

Manufacturer information


Fix All High Tack Invisible is a high quality, single component joint sealant with high adhesive strength and cures completely Invisible. It is based on SMX® Hybrid Polymer technology.
- High initial tack reducing the need for initial support.
- Fast curing, quick build-up of end strength, high sheer strength after full cure (no primer)
- Easy to apply and easy to tool and finish
- Remains elastic after curing
- No odour
- Does not contain isocyanates, silicones nor solvents
- Paintable with all water based paints
- Good colour stability, weather and UV resistance
- Good adhesion on wet substrates
- Sealing and bonding in the building and construction industry.
- Structural bonding in vibrating constructions.
Joint dimensions:
- Minimal width: 2mm (bonding) 5mm (joints)
- Maximal width: 10mm (bonding) 30mm (joints)
- Minimum depth: 5mm (joints

Recommendation: width of joint = 2x depth of joint

Method: Manual- or pneumatic caulking gun
Application temperature: +5°C until +35°C
Cleaning: Fix ALL Cleaner immediately after
application and before curing
Tooling: with soapy solution before skin formation
Repair with: Fix ALL High tack
- Fix ALL High Tack may be painted, however due to the large number of paints and varnishes available we strongly suggest a compatibility test
before application. The drying time of alkyd resin based paints may increase.
- Fix ALL High Tack can be applied to a wide variety of substrates. Due to the fact that specific substrates such as plastics, polycarbonate, etc… may differ from manufacturer to manufacturer, we recommend preliminary compatibility tests.
- While producing plastics very often releasing agents, processing aids and other protective agents (like protection foil) are used. These should be removed prior to bonding. For optimum adhesion the use of Surface Activator is recommended.
- This product can not be used as a glazing sealant.
- Fix ALL High Tack can be used for bonding of natural stone, but it cannot be used as a joint sealant on this type of surface. Fix ALL High Tack can therefore only be used on the bottom of natural stone tiles.
- When applying, make sure not to spill any sealant on the surface of materials.

Additional Information

Trade Only No
Height No

Customer Reviews

Review "Soudal Fix ALL® High Tack INVISIBLE - Multi purpose adhesive"

Write Your Own Review

How do you rate this product? *