Nortex Opalex - Etch Glass Film
Nortex Opal Etch is a monomeric, 80 micron etch glass vinyl suitable for interior and exterior use. A fantastic product for effective privacy control, manifestation and decorative effect of glass. Used extensively in the office fit-out and glass partition industry.
Nortex Opal Etch has some fantastic features:
- Unique Solvent based Ultra-Clear adhesive
- Compeltely UV stable adhesive
- Adhesive will not Yellow over time
- Perfect for wet application
Technical Specifications
Carrier: Monomeric PVC film, highly stabilized, calendered
Thickness: 80 µ (ISO 4593)
Adhesive: Ultra-Clear Solvent-Acrylic, permanent
Adhesion: 7,5 N/cm (Finat FTM 1, after 24 hrs. on Stainless steel)
Dimensional stability: Shrinkage < 0,4 mm (Finat FTM 14)
Liner: One-sided clay-coated Silicone paper (90 g/m²)
Tensile strength md: > 20 MPa (DIN EN ISO 527)
Tensile strength cd: > 20 MPa (DIN EN ISO 527)
Elongation md: > 160 % (DIN EN ISO 527)
Elongation cd: > 180 % (DIN EN ISO 527)
Application temperature: > + 10 °C
Temperature durability: - 40 °C - +80 °C
Durability: Up to 5 years (unprinted material, vertical outdoor exposure, central European normal climate)
Details
Nortex Opal Etch is a monomeric, 80 micron etch glass vinyl suitable for interior and exterior use. A fantastic product for effective privacy control, manifestation and decorative effect of glass. Used extensively in the office fit-out and glass partition industry.
Nortex Opal Etch has some fantastic features:
- Unique Solvent based Ultra-Clear adhesive
- Compeltely UV stable adhesive
- Adhesive will not Yellow over time
- Perfect for wet application
Technical Specifications
Carrier: Monomeric PVC film, highly stabilized, calendered
Thickness: 80 µ (ISO 4593)
Adhesive: Ultra-Clear Solvent-Acrylic, permanent
Adhesion: 7,5 N/cm (Finat FTM 1, after 24 hrs. on Stainless steel)
Dimensional stability: Shrinkage < 0,4 mm (Finat FTM 14)
Liner: One-sided clay-coated Silicone paper (90 g/m²)
Tensile strength md: > 20 MPa (DIN EN ISO 527)
Tensile strength cd: > 20 MPa (DIN EN ISO 527)
Elongation md: > 160 % (DIN EN ISO 527)
Elongation cd: > 180 % (DIN EN ISO 527)
Application temperature: > + 10 °C
Temperature durability: - 40 °C - +80 °C
Durability: Up to 5 years (unprinted material, vertical outdoor exposure, central European normal climate)